7000 Series Description
| Command (See full Spec for Details) |
HEX Code | Description |
| Character Display | 20H-0FFH | Display the character on the cursor position See Font table |
| Back Space | 08H | The cursor moves to the left by one character |
| Horizontal Tab | 09H | The cursor moves to the right by one character |
| Line Feed | 0AH | The cursor moves to one lower line |
| Home Position | 0BH | The cursor moves to the home position |
| Carriage Return | 0DH | The cursor moves to the left end of the same line |
| Cursor Set | 1FH, 24H, xL, xH, yL, yH | The cursor moves to the specified X-Y position xL, xH X adrs low, high, yL, yH Y adrs low, high default xL, xH, yL, yH=00H |
| Display Clear | 0CH | The display is cleaned and the cursor moves to Home |
| Initialize Display | 1BH, 40H | Return to the default. DIP SW is not re-loaded |
| Specify Download Register | 1BH, 25H, n | Specify enable/disable for download register n=0 enable, n=1 disable, default n=0 |
| Download Character Definition | 1BH, 26H, a, c1, c2, X1, d1, .. , dx1, ,Xk, d1, .. dxk | Define the download characters into RAM , max 16 a=01H, c1:start chara. code, C2:end chara. code X:No of dots for X direction, dn:define data |
| Delete Downloaded Character | 1BH, 3FH, 01H, c | Delete the defined character code c:character code for delete |
| Specify International Font Set | 1BH, 52H, n n : decimal | Select int'l font set. Simple symbol only See Font table default n=0n=0 US, n=1 France, n=2 Germany, n=3 England, n=4 Denmark1, n=5 Sweden, n=6 Italy, n=7 Spain1, n=8 Japan, n=9 Norwayn=10 Denmark2, n=11 Spain2, n=12 Latin America, n=13 Korea |
| Specify Character Code Type | 1BH, 74H, n n : decimal | Select font code, n=0 US-Euro std, n=1 Katakana, n=2 Multilingualn=3 Portuguese, n=4 Canadian-French, n=5 Nordicn=16 WPC1252, n=17 Cyrillic #2, n=18 Latin 2, n=19 PC858default n=0 See Font table |
| Over write Mode | 1FH, 01H | Over write, or replace exist data |
| Vertical Scroll Mode | 1FH, 02H | Scroll cursor up 1 line |
| Horizontal Scroll Mode | 1FH, 03H | Scroll cursor horizontally 1 space |
| Horizontal Scroll Speed | 1FH, 73H, n | Specify horizontal scroll speed 0<=n<=31n=0 by Character, n=1 fastest , n=31 slowest , default n=0 |
| Specify or CancelReverse Display | 1FH, 72H, n | Specify or Cancel reverse dsiplay moden=0 cancel(STD display), n=1 Reverse mode, default n=0 |
| Specify Write MixtureDisplay Mode | 1FH, 77H, n | The new character or graphic image display is mixed with current display image stored in the memoryn=0 Not mix, n=1 OR, n=2 AND, n=3 EX-OR, default n=0 |
| Brightness Control | 1FH, 58H, n | Specify brightness level of whole screen1<=n<=8, n=1 darkest, n=8 brightest , default n=8 |
| Wait | 1FH, 28H, 61H, 01H,t | Define wait time Wait time=approx. t*0.5sec |
| Scroll Display Action | 1FH, 28H, 61H, 10H,wL, wH, cL, cH, s | Shift the display screen wL, wH Display screen shift area low/highbyte, cL,cH Repetition low/high byte, s speed approx. s x 14msec |
| Display Blink | 1FH, 28H, 61H, 11H, p, t1, t2, c | Display Blink, p=0 Normal, p=1 Repeat normal & blankp=2 Repeat normal & reverse, t1, t2 Noramal & blank/reversetime approx. t*14msec, c : Number of repeat |
| Screen Saver | 1FH, 28H, 61H, 40H, p | Screen saver mode p=0 Power save, p=1 Power onp=2 All dots off(not power save), p=3 All dots onp=4 Repeat normal & reverse display(2sec each) |
| Real Time Bit Image Display | 1FH, 28H, 66H, 11HxL, xH, yL, yH, g, d1, ,dk | Display the bit image data, xL,xH Bit image Xsize low/high(1dot)yL,yH Bit image Ysize low/high(8dots), g=1(Fixed)d1,… dk, Bit image data |
| Character Display Width | 1FH, 28H, 67H, 03H, w | Specify character data Width w=0 Fixed 1, w=1 Fixed 2w=2 Proportional 1, w=3 Proportional 2, default w=1 |
| Font Magnified Display | 1FH, 28H, 67H, 40H, x,y | Specify the size of magnification x=1, 2, 3, 4, y=1, 2default x=1, y=1 |
| Current Window Select | 1FH, 28H, 77H, 01H, a | Select current window a=0, Base windowa=1-4 User Window |
| User Window definition-cancel | 1FH, 28H, 77H, 02H, a, b,xPL, xPH, yPL, yPH,xSL, xSH, ySL, ySH | Define or Cancel User Window, a Window # 1-4, b=0 Cancelb=1 Define, xPL,xPH Left position of window low/high byteyPL,yPH Top position of window low/high byte, xSL,xSH window X size low/high byte(1dot), ySL,ySH window Y size low/high byte(8dots) |
| Write Screen Mode Select | 1FH, 28H, 77H, 10H, a | Select the write screen mode. This command effects onlyfor Base Window. a=0 Display screen mode a=1 All screen modedefault a=0 |