3.1 Frame Type Assembly

Table 3 Standard Lead Sizes of Frame Types(unit: mm)

Package Width(W)	Package Thickness(T)	Straight Leads		Right Angle Leads			Fig.4 Lead Pin in Frame Type
		P	Q	P	Q	R
20.5	6.2, 6.7	8.0	4.0	9.0	5.0	2.0
25.0	6.2, 6.7, 8.0
29.0	7.2, 8.0
33.5	8.0
40.0	8.0
	10.0	9.0	5.0
50.0	10.0, 11.2
60.0	10.0
	13.2			11.0	7.0	2.5
75.0	13.2

Note: Standard Frame Leads pitches are 2.54mm and 2.0mm.

3.2 Welded Wire Leads Type Assembly
0.5mm diameter wire pins will be welded to frame leads when longer pin length is needed.
If you need any different leads length, please consult us.

Table 4 Standard Lead Sizes of Welded Wire Leads(unit: mm) 13.2

Package Width(W)	Package Thickness(T)	Straight Leads		Right Angle Leads			Fig.5 Lead Pin in Welded Wire Type
		P	Q	P	Q	R
20.5	6.2	35.0MAX 12.0MIN	7.0	28.0MAX 6.5MIN	3.2	2.5
	6.7				2.7
25.0	6.2				3.2
	7.2				2.7
	8.0
29.0	7.2
	8.0
33.5	8.0
40.0	8.0
	10.0				1.7
50.0	10.0
	11.2			25.0MAX 7.0MIN	0.7	3.5
60.0	10.0
	13.2				0MAX
75.0

Note: Standard Welded Wire Leads pitches are 2.54mm and 2.0mm.

3.3 Card Edge Type Assembly

Table 5 Standard Lead Sizes of Card Edge Type(unit: mm)

Package Width	Package Substrate Thickness	Card Edge Width	Lead Thickness	Straight Leads	Right Angle Leads	Fig.6 Lead Pin in Card Edge Type
W	PT	C	LT	P	P
16.2	1.8	3.0	3.0	10.0 14.0 34.0	10.0 14.0 21.0
20.5 to 40.0	1.8	3.0
43.0 to 60.0	2.8	3.0
75.0	3.8	3.5

Note: Standard Lead pitches are 2.54mm, 2.0mm, 1.78mm or 1.27mm.