4.1 General Design Rules

(1) Minimum Width of each segment.

• 0.18mm MIN for Blue Green
• 0.20mm MIN for other colors

(2) The minimum gap between each segment is variable as follows;

Same color segments placed on the same anode base. Different color segments placed on the same anode base. Same color segments placed on the separate anode base. Different color segments placed on the separate anode base.

4.2 Luminous Uniformity
Lighting up large areas of the display or flashing certain segments may decrease the luminous uniformity of the display. Restrictions on minimum distance between anodes as follows;

(1) Different anodes closely placed

(2) Line formed anode and another anode closely placed

4.3 Design rules of Grid separation

(1) Standard grid mesh separation Note: Please consult us for the size of the overlapped area.

(2) Upper and lower grid mesh separation in Hybrid Type Construction Note: This figure may vary based on the pattern.