Replace dim VFDs to refresh your old equipment
Replace dim VFDs to refresh your old equipment
Noritake VFD is pretty solid and it can display information for many years. But the VFD loses brightness over the years. During the time that a VFD is powered on, this causes the heater wire and the phosphor coating to age over time. Old equipment can be refreshed by replacing a dim VFD with a new one, providing additional years of service.
If the old equipment is still working but the display is difficult to read due to a dimming VFD, it can be more economically feasible to refresh the equipment instead of discarding it. The end users can reap the benefits of just replacing the VFD instead of the entire piece of equipment to eliminate the purchasing cost of new equipment. Would you like to start a refresh project for your end users?
Noritake VFD has been a very long-term supply. Please search for your part number on the "Selection guide page". If you cannot find the number, please search the number for the status and replacement model on the "List of recommended compatible products". If it is an available model, we can provide it at a 1-piece minimum quantity.
We can provide options for reproduction or redesign depending on the situation and project volume even if the model is discontinued.
If the status of the part number is not available, please feel free to ask us.
Noritake VFD has been a very long-term supply. Please search for your part number on the "Selection guide page". If you cannot find the number, please search the number for the status and replacement model on the "List of recommended compatible products". If it is an available model, we can provide it at a 1-piece minimum quantity.
We can provide options for reproduction or redesign depending on the situation and project volume even if the model is discontinued.
If the status of the part number is not available, please feel free to ask us.