Get Started with GT-SP TFT LCD Touch Screen Evaluation Kit

We can lend you a free sample to get started on your evaluation now

You can evaluate the GT-SP 7" TFT module with Arduino as soon as free. Please write the message "Borrow GT-SP" in our web contact form. This campaign is available for a limited time and quantity only, so don’t miss out!

[Package Content]

[Connecting to a Host Controller (Arduino Nano Every)]

When connecting with a 5V operating microcontroller, the signal level must be changed to 3.3V for the display module. The above example shows how the signal level is changed by using a voltage divider with a resistor.

[Support Guide]

- GT-SP user guide 1（Introduction) - GT-SP user guide 2（How to use design tools) - GT-SP user guide 3（Host control section)

You can download design tools and sample projects/programs from the Technical Support Page.

▶ Go to the GT-SP Technical Support Page

[Terms]

- This campaign is for Corporate Customers Only. - A limit of one per customer (corporate). - Let us know your project details when request us. - Free samples are limited numbers (20 pcs). If many customers request the offer, we may offer you another offer.

- The lending period is two months. - Please return the sample to the below address after your evaluation. ------------------------------------------------------------------ Noritake Co., Inc. ATTN: Return GT-SP Sample 2635 Clearbrook Dr, Arlington Heights, IL 60005 Phone: (847) 439 – 9020 ------------------------------------------------------------------

- Solder on the samples is acceptable. - You do not have to pay damages even if the sample is broken. - We shall not be liable to compensate you for the damages by your evaluation.