GU-D Series: Capacitive Touch VFD Module
GU-D Series Features
Noritake added capacitive touch switch to the visible VFD Module.
Capacitive Touch Switch
Both 8×2 or 8×4 touch switch grid modules.
Self Capacitive Touch Modules are available.
Mutual Capacitive Touch Modules are Available.
Touch data can be sent via:
- Inter-Integrated Circuit (I2C)
- Serial Peripheral Interface (SPI)
- Asynchronous Serial (UART)
The touch panel is mounted on the face of the display and its sensitivity can be adjusted to allow interaction even when the user is wearing rubber gloves.
Self & Mutual Capacitive
Mutual capacitive type can be operated with gloves and water interference.
Unified Touch and Display Commands
The touch and display commands for this module family are integrated into one command set. These commands only need to be sent to the display through one of its three supported interfaces.
Thin Film Metallic Panel with High S/N Ratio
The GU-D family is integrated with a thin film metallic panel that has a lower impedence than ordinary ITO touch panels. This allows the panel to reach a higher S/N ratio, a wider touch sense margin and better overall sensitivity.
Four General I/O Ports
Macro programs are also capable of controlling four general I/O ports on the module. These ports can be used to control other peripheral devices.
Program Macro Execution
Macro programs can be developed and saved onto the module and used without an external controller. These programs can also be set to execute uponsystem start-up.
Wide Operating Temperature
The GU-D series modules can fully operate and be stored under a temperature range of -40°C to 85°C.
Dot illumination on the module has a broad spectrum with its peak reaching a bluish-green color that is pleasent to look at and easy to see at a distance. This also allows for a wide viewing angle.
Arduino Code Library
There is currently a code library that allows the core functionality of the GU-D modules to be accessed by an Arduino Uno. This code library includes all display and touch commands associated with the GU-D series modules.
GU-D Arduino Code Library
- Covers the basic display and touch commands.
- Written in standard C++ for the Arduino 1.6.7 IDE.
- Example programs are included to help understand touch data flow.
GU-D Series Technical Specifications
|Part Number||Touch Switch Grid|
X x Y
|No. of Dots||Char. Size (mm)||No. of Characters||No. Kanji /|
|PCB Size W x H (mm)||Display Area (mm)||Interface||Power (All Dots On) Typ||Weight (g)||Online Shop||Specification||3D CAD Data|
|GU128X32D-D903S||8 x 2||128 x 32||2.1 x 2.9||18×4 Fixed|
21×4 Fixed 2
21×4 + Prop.
|8 x 2||98.0 x 31.0||57.45 x 13.93||I2C (3.3V CMOS)|
SPI (3.3V CMOS)
Async Serial (3.3V CMOS)
|GU140X32F-D903S||8 x 2||140 x 32||2.4 x 4.6||20×4 Fixed|
23×4 Fixed 2
23×4 + Prop.
|8 x 2||98.0 x 60.0||69.85 x 21.61||5/340||66||Sample|
|GU256X64C-D903M||8 x 2||256 x 64||1.5 x 2.2||36×8 Fixed|
42×8 Fixed 2
42×8 + Prop.
|16 x 4||125.0 x 37.0||83.08 x 20.68||5/440||67||Sample|
|GU256X128C-D903M||8 x 4||256 x 128||1.5 x 2.2||36×16 Fixed|
42×16 Fixed 2
42×16 + Prop.
|16 x 8||131.0 x 66.0||83.1 x 41.5||5/730||187||Sample|
|GU256X128D-D903M||8 x 4||256 x 128||2.1 x 3.0||36×16 Fixed|
42×16 Fixed 2
42×16 + Prop.
|16 x 8||170.0 x 90.0||115.05 x 57.45||5/1200||370||–||–|
Value Added Services
GU-D Series Arduino Code Library
Program and control a GU-D module yourself using Arduino
A code library has been developed for integration between the Arduino Uno and GU-D modules.
NOTE: The demo programs within this library were designed specifically for the GU128X32D-D903S module.
GU-D Series GUD10K Connection Kit
Easily connect your new GU-D module to a PC
Noritake offers a daughter board that allows the GU-D modules to quickly and easily connect to a Windows PC for evaluation.
Available in many colors and sizes
Noritake Itron offers 5 colors (gray, blue, green, aqua and rose) in 11 popular VFD module display sizes. Additional colors and sizes are available upon request
Do you need connectors, cables, and/or color filters?
Let us pre-assemble and inspect the quality for you. We follow the IPC standards and nothing leaves the door unless the quality meets Class 2 or higher. Not only can you cut down on the extra cost associated with subcontracting the secondary operation, it’s one less thing you have to worry about.