Video: Touch TFT Module GT-SP series | How to Perform an Initial Evaluation
This article explains how to use development tools for initial evaluation of Noritake's touch LCD module - GT-SP series.
[USA]
WEB
https://www.noritake-elec.com/products/lcd-touch-screen/gt-sp
GT Design Studio
https://www.noritake-elec.com/support/design-resources/tools/gt-design-studio
Firmware
https://www.noritake-elec.com/support/design-resources/tools/gt-sp-series-firmware-download
[Global]
WEB
https://www.noritake-itron.jp/eng/products/tft/gt-sp
GT Design Studio
https://www.noritake-itron.jp/eng/cs/soft/42
Firmware
https://www.noritake-itron.jp/eng/cs/soft/49
0:00 Introduction
1:39 Launching the Development Tool and Initial Setup
2:21 How to Use the Development Tool
3:27 Placing Buttons
4:39 Page Navigation
5:35 Placing Images
6:40 Font Settings
7:09 Using Other Objects
7:57 Outputting Signals to External Devices
[USA]
WEB
https://www.noritake-elec.com/products/lcd-touch-screen/gt-sp
GT Design Studio
https://www.noritake-elec.com/support/design-resources/tools/gt-design-studio
Firmware
https://www.noritake-elec.com/support/design-resources/tools/gt-sp-series-firmware-download
[Global]
WEB
https://www.noritake-itron.jp/eng/products/tft/gt-sp
GT Design Studio
https://www.noritake-itron.jp/eng/cs/soft/42
Firmware
https://www.noritake-itron.jp/eng/cs/soft/49
0:00 Introduction
1:39 Launching the Development Tool and Initial Setup
2:21 How to Use the Development Tool
3:27 Placing Buttons
4:39 Page Navigation
5:35 Placing Images
6:40 Font Settings
7:09 Using Other Objects
7:57 Outputting Signals to External Devices
