Support Guide

Arduino code library and how to launch the “Hello” example program.

CU-Y command descriptions with C++ sample code

Easy to follow starter guide for CU-Y modules

Please download and read the Getting Started with GT-CP: Connect to PC support document first.
This document follows the first support document and describes how to connect GT-CP to MicroController. The instructions in this document will walk you through the process of interfacing your GT-CP module with an embedded controller. This document uses our GT-CP code library for MSP430™.

This guide is intended to inform the user on how to quickly and safely connect the GT module and learn how to easily store and display images and characters on GT-CP series modules using the GTOMP evaluation software.

Support Guide for GT-CP Communication on Linux.
This guide describes USB communication methods for the GT-CP modules using Linux:

• Libusb.h Communication Library
• Generic USB Driver

Part 1: Downloading and Installing the iDevTFT Development Environment.

Part 2: Connecting the GT-EP to a PC and installing the driver for the module.

Part 3: Creating a project and adding a menu file to that project.

Part 4: Explaining every single line of code in the example program that is automatically generated when you create your first menu file.

Part 5: Sending the example program to GT-EP and saving onto its NAND memory or an SD Card.

This section will explain the primary usage of our design tool GT Design Studio by creating an operating screen example using a GT-SP.

This section will explain the primary usage of our design tool GT Design Studio by creating an operating screen example using a GT-SP.

The GT-SP can be connected to most major microcontrollers through a serial I/F. This section describes the basics of controlling the standard 7-inch GT-SP model (GTWV070S3A00P) with the Arduino Nano Every as the host controller.

Quick view of GU-7000B command category, code and description

Create the menu select screen with highlight text

Select the international font and set the extended ASCII font table

Convert the design, store and enable/disable the custom fonts

Use the Vertical/Horizontal font magnification commands